Injection molding machine

An injection molding machine

Paper clip mold opened in molding machine; the nozzle is detectable at authority. A 1300 ton injection molding machine with robotic arm.
An Injection molding machine, also approved as an injection press, is a machine for casting plastic products by the injection molding process. It dwell of two main parts, an injection unit and a clamping unit.

Types of injection molding machines

Machines are classified primarily by the type of propulsive systems they use:

injection molding machines hydraulic molding machine  , mechanical molding machine  , electrical molding machine , or hybrid molding machine

Hydraulic molding machine

Hydraulic presses have actual act the only option available.injection molding machine. Hydraulic machines, admitting not virtually as precise, are the current type in most of the world, with the exception of Japan.

Mechanical molding machine

Mechanical molding machines use the dial system for building up capacity on the clamp side of the machine. Capacity is required on all machines so that the clamp side of the machine does not open due to the injection pressure. If the tool half opens up it will create flare in the plastic product.

Electric molding machine

The electric molding machine, also known as Electric Machine Technology (EMT), reduces operation costs by cutting energy consumption and also addresses some of the environmental concerns surrounding the hydraulic press. Electric presses have been shown to be quieter, faster, and have a higher accuracy, however the machines are more expensive.

Hybrid molding machine

Hybrid molding machine (sometimes referred to as “Servo-Hydraulic”) molding machines claim to take advantage of the best features of both hydraulic and electric systems, but in actuality use almost the same amount of electricity to operate as an electric injection molding machine depending on the manufacturer.

Robotic arm

A robotic arm is often used to remove the molded components; either by side or top entry, but it is more common for parts to drop out of the mold, through a chute and into a container.

Main components of injection molding machine


Injection molding equipment originates from metal die casting processes. And injection molding machine has two main unit.

  •  Plastic injection unit
  •  Mold clamping unit

Plastic Injection Unit

In aspect, an injection unit’s primary functions are to melt and accommodate a polymer before injecting it into a mold cavity.

The injection is similar to an eject. It shelter a barrel that a holder with a supply of plastic pellets feeds from one end. Inside the barrel is a screw that turns to mix and heat the polymer. The screw also acts as a ram that quickly moves forward to inject fused plastic into the mold. A non return valve near the screw’s tip prevents the fused material from flowing rearward along the screw’s threads.

Later in the molding cycle, the screw, or ram, returns to its departed position. Because of the screw’s dual action, it’s referred to as a retaliate screw, which also classify the machine type. Older injection molding machines use a simple ram without screw departures. However, the retaliate screw design’s excellence has promoted its widespread acceptance in today’s custom injection molding companies.

Mold Clamping Unit

The clamping unit’s primary functions include:

Holding the two halves of the mold in proper alignment
Keeping the mold closed during the injection process by applying a clamping force strong enough to resist the injection force.
Opening and closing the mold at the appropriate times during the molding cycle

Clamping units have two platens—a fixed and movable platen—and a mechanism for translating the movable platen. The system is like a power press that a hydraulic piston or mechanical dial device operates. Larger machines have clamping forces of several thousand tons.

Injection molding machine parts name

About Zaighum Shah 57 Articles
Zaighum Shah is a mechanical engineer having more than 20 years of experience. Zaighum is specializing in product development in Sugar Mill industries. Zaighum has gone through all phases of mechanical engineering and it’s practical implementation. Zaighum has been solving most complex problems, designing new systems and improving existing models and systems.